Free Tack Adaptor on CX-drum with

CX-halyard swivel

This is an all-in-one solution for the sailor using both Code 0 and gennaker and prefers using one halyard for both applications.

Calculation table for AT-cable, length and maximum sail space. GX-sail on GX-furler.

Model	CX model:	AT-cable length (mm)	Max sail space (mm)
ID	Total distance between the halyard swivel pin and the attachment in the deck/bowsprit
SD	Standard deduction (recommended):	- 100	- 100
TS	Total system length	= -100	= -100
F	Deduction for halyard swivel	- 90
E	Deduction for lower swivel	- 115
AS	Reduction for adaptor	- 30
	Any other deductions such as 2:1 bridle below lower swivel and / or 2:1 halyard system	-	-
ATS	Max space for the AT-cable	= -335
%	Deduction (1%) for the elongation of the AT-cable = ATS x 0.01	- -3	-3
SDH	Deduction for halyard swivel (including thimble)		- 110
SDA	Deduction for free tack adaptor		- 35
CRL	Cover length of the AT-cable NOTE! This is NOT the cutting length!	= -332
B	Addition for upper thimble and Colligo AT-clamp(s)	+ 220
A	Addition for Line-lock terminal (Free tack adaptor)	+ 120
ATL	AT-cable total length (cutting length)	= 8
MSS	Max sail space (including space for lashing)		= -272

Control measurement of assembled system		Total system length
PTP	Pin-to-pin length (SDA + MSS):	-237 mm